factory menu paint roller search lock profile switch star remove

Industrial Paints & Protective Coatings

“We have your application covered”

Gates & Railings

10-3 QD3 Quick Drying Black Eggshell Finish

Single pack, fast drying,rapid hardening, good adhesion
  • Overcoating Time @ 20°C : Should a second coat of QD3 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the QD3. After this 2 hour period, the QD3 will require at least 10 days curing before becoming resistant to solvents in the second coat.
  • Touch Dry @ 20°C: 15 minutes

13 Rapidac High Build

Single pack high build quick drying zinc phosphate primer

  • Overcoating Time @ 20°C : May be overcoated after 45 minutes or as soon as firm dry with Dacrylate Vehicle and Machinery Enamel or with Dacrylate QD3 Enamel when primer is firm dry but within 2 hours, or allow primer to dry overnight.
  • Colour: Red Oxide, grey

150-226 Gold Lacquer

An acrylic resin with metallic flake pigment that gives a decorative gold effect to wrought iron, street furniture and similar applications

  • Overcoating Time @ 20°C : Overcoating with clear lacquer is reommended to prevent tarnishing By brush application, apply one or two coats of Dacrylate Clear Acrylic Glaze. Refer to technical data sheet
  • Touch Dry @ 20°C: 40 minutes

41 Vinadac High Build MIO

Single pack vinyl/micaceous iron oxide with rust inhibitive pigment.  High build barrier coating for long term protection of steel and galvanised steel in aggressive and/or wet environments. Outstanding adhesion to galvanised steel.  Damp tolerant during application.  'Class O' fire rating when applied to a non combustible substrate.  Matt specular finish.

  • Overcoating Time @ 20°C : 3 hours
  • Touch Dry @ 20°C: 2 hours
  • Colour: Black, Grey, Blue

41-120 Vinaprime HB Anti Corrosion Primer

Single pack high build inhibitive primer for steel and rusty galvanised steel . Damp tolerant and fast drying, rapid overcoating.

  • Overcoating Time @ 20°C : 2 hours
  • Touch Dry @ 20°C: 40 minutes
  • Colour: Buff (other colours to special order)

510 QD3 Quick Drying Gloss Enamel

Single pack modified alkyd fast drying gloss finish for general metal work. Rapid hardening with good adhesion

  • Overcoating Time @ 20°C : Should a second coat of QD3 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the QD3. After this 2 hour period, the QD3 will require at least 10 days curing before becoming resistant to solvents in the second coat
  • Touch Dry @ 20°C: 15 minutes
  • Colour: Tinted to any BS4800/Ral/BS381C or bespoke colour

541 Vinadac High Build Vinyl Sheen

Single pack fast drying high build vinyl pigmented with light fast durable pigmentation. High build coating for protection of steel and galvanised steel in aggressive environments.  Tolerant of damp surfaces during application with excellent flexibility retention.

  • Overcoating Time @ 20°C : 3 hours
  • Touch Dry @ 20°C: 2 hours
  • Colour: Tinted to any BS4800/Ral/BS381C or bespoke colour

597 Vehicle & Machinery Gloss Enamel

Single pack modified alkyd finishing coat for vehicles, plant and machinery. Excellent durability with good resistance to oils, grease and similar. Dries to hard film with hard abrasion and impact resistance.

  • Overcoating Time @ 20°C : Should a second coat of Vehicle and Machinery Enamel be required, this can be applied as soon as the first coat is touch dry, ie. up to 1 hour - or allow coating to dry overnight.
  • Touch Dry @ 20°C: 1 hour
  • Colour: Tinted to any BS4800/Ral/BS381C or bespoke colour

599 Dacthane Gloss Enamel

Single pack  urethane alkyd finishing coat for vehicles, plant and machinery. Excellent durability with good resistance to oils, grease, etc. Dries to tough film with high abrasion and impact resistance.

Dacthane finishes from the Dacmix scheme are 'Compliant' to Environmental Protection Act (1990) Clause 20(d) of Guidance Note PG6/23 (97).

  • Overcoating Time @ 20°C : Should a second coat of Dacthane Enamel be required, this can be applied as soon as the first coat is touch dry, ie. up to 2 hours - or allow coating to dry completely for at least 16 hours.
  • Touch Dry @ 20°C: 2 hours
  • Colour: Tinted to any BS4800/Ral/BS381C or bespoke colour

98 Quick Drying Anti Corrosion Primer

Single pack fast drying primer using modified alkyd, zinc phosphate with good rust-inhibitive properties suitable for the protection of steel. 

  • Overcoating Time @ 20°C : Maybe overcoated after 45 minutes or as soon as film-dry with all white spirit based finishing coats. Fast-drying finishing coats based on stronger solvents should be overcoated when primer is firm-dry but within 1 hours, or allow primer to dry overnight (refer to data sheet)
  • Touch Dry @ 20°C: 30 minutes
  • Colour: Black, White, Grey-Green, Buff, Cupress, Red Oxide, Yellow, Blue, Grey, other colours to special order

Corroless QDR

 Single pack. Quick drying rust stabilising primer reinforced with self leafing glass flake for hand prepared steel.  Fast overcoating from only 30 minutes.  NATO Stock Number 0442-6850-25-150-0974.

  • Colour: QDR1 Red Brown QDR2 Buff QDR3 Black

Corroless RF16

 Single pack high build glass flake reinforced alkyd topcoat.  Abrasion resistant and fast drying compared to other high build alkyds.

  • Colour: Tinted to BS4800, Ral and BS381C

150-23 T Wash Mordant Solution for Galvanised Steel

Highways Agency 155
  • Touch Dry @ 20°C: 20 -60 minutes
 
Showing 1 to 13 of 13 (1 Pages)
×

Join Our Newsletter

Signup today for free.