factory menu paint roller search lock profile switch star remove

Industrial Paints & Protective Coatings

“We have your application covered”

Galvanised Steel

41 Vinadac High Build MIO

Single pack vinyl/micaceous iron oxide with rust inhibitive pigment.  High build barrier coating for long term protection of steel and galvanised steel in aggressive and/or wet environments. Outstanding adhesion to galvanised steel.  Damp tolerant during application.  'Class O' fire rating when applied to a non combustible substrate.  Matt specular finish.

  • Overcoating Time @ 20°C : 3 hours
  • Touch Dry @ 20°C: 2 hours
  • Colour: Black, Grey, Blue

41-120 Vinaprime HB Anti Corrosion Primer

Single pack high build inhibitive primer for steel and rusty galvanised steel . Damp tolerant and fast drying, rapid overcoating.

  • Overcoating Time @ 20°C : 2 hours
  • Touch Dry @ 20°C: 40 minutes
  • Colour: Buff (other colours to special order)

42 Vinadac High Build Glassflake Reinforced Sheen Finish

Single pack high build vinyl pigmented with durable, light fast pigments reinforced with glassflake.  High build coating for protection of steel and galvanised steel in aggressive environments.  Tolerant of damp surfaces during application.
  • Overcoating Time @ 20°C : 3 hours
  • Touch Dry @ 20°C: 2 hours
  • Colour: Full range to special order

541 Vinadac High Build Vinyl Sheen

Single pack fast drying high build vinyl pigmented with light fast durable pigmentation. High build coating for protection of steel and galvanised steel in aggressive environments.  Tolerant of damp surfaces during application with excellent flexibility retention.

  • Overcoating Time @ 20°C : 3 hours
  • Touch Dry @ 20°C: 2 hours
  • Colour: Tinted to any BS4800/Ral/BS381C or bespoke colour

79-6 Epidac 1 Zinc Rich Primer

Single pack epoxy-ester/metallic zinc coating that is typically used as a single-pack 'sacrificial' primer for steel. Also used a 'repair' primer for damaged galvanised steel. Conforms to BS:4652 Part1.


  • Overcoating Time @ 20°C : When first dry or after 48 hours When overcoating with coatings based on mild solvents (i.e. white spirit), the primer need only be firm dry (i.e. approximately 2 hours) or any time thereafter. For fast drying finishing coats based on stronger ‘aromatic’ solvents, the primer should be overcoated when firm dry (and for up to 4 hours) or after 48 hours.
  • Touch Dry @ 20°C: 30 minutes
  • Colour: Grey

79-62 Epidac 2Z Zinc Rich Primer

Two pack epoxy, metallic zinc, confirming to BS4652 Type 3 and BS5493 (Ref: DF and KP 1B)

  • Overcoating Time @ 20°C : Overnight - refer to technical data sheet
  • Touch Dry @ 20°C: 1 hour
  • Colour: Grey

Corroless M

Single pack.  Rust stabilising primer for use on weathered  rusted areas of galvanizing, steel and other metals.  Enables the use of one primer for various substrates.  No etch primer or barrier coat required on galvanizing.  Excellent adhesion and flexibility.

  • Colour: Red Brown

Rustoleum GALVA PLUS Aerosol

Hard Hat Galva-Plus Silver 2120 is a fast drying zinc/aluminium coating. The product contains pure zinc and aluminium as pigment. Galva-Plus Silver 2120 is intended to be applied on small areas or for touchup. The product should be used as a single coat in light industrial exposures and corrosive environments.



 

 

  • Coverage: 1.7 Sqm
  • Colour: Aluminium Gloss

Rustoleum GALVA ZINC-ALU Aerosol

 A fast drying zinc rich primer/topcoat based on an epoxy ester resin. The product contains pure zinc and aluminium as pigment and provides cathodic protection. Should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas. For use on damaged galvanized steel surfaces and is intended to be applied on small areas or for touch-up.

 

 

  • Coverage: 1.2 Sqm
  • Colour: Sparkling Aluminium

150-23 T Wash Mordant Solution for Galvanised Steel

Highways Agency 155
  • Touch Dry @ 20°C: 20 -60 minutes
 
Showing 1 to 10 of 10 (1 Pages)
×

Join Our Newsletter

Signup today for free.