factory menu paint roller search lock profile switch star remove
Corona Virus Update
Our store is still open.
Call us on 0161 624 4941 or email us at sales@kenyonpaints.co.uk

Industrial Paints & Protective Coatings

“We have your application covered”

Floors & Line Marking

150 Waymark Line Marking

Spirit based hard resin coating, typically used as a fast-drying lining paint for use on concrete and asphalt floors. Non-bleeding on bitumen/asphalt floors

  • Overcoating Time @ 20°C : After 1 hour (will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 10 minutes
  • Colour: White, Yellow

21 Floor Coat Alkyd Floor Paint Matt Finish

Single pack, economic, fast drying, hard wearing floor paint

  • Overcoating Time @ 20°C : Overnight (dry for foot traffic after overnight drying - will vary with temperature , air movement etc).
  • Touch Dry @ 20°C: 3 hours
  • Colour: Pewter

518 Dac Crete Floor Paint Gloss Finish

Single pack polyurethane coating  hard-wearing coating for floors, light to medium traffic

  • Overcoating Time @ 20°C : Overnight (dry for foot traffic after overnight drying-will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 3 hours
  • Colour: Tinted to any BS4800/Ral/BS381C or bespoke colour

579 Epidac 2S Epoxy Floor Gloss Finish

Two pack epoxy-polyamide with additive to enhance adhesion to concrete.   Hard wearing, abrasion and chemical resistant coating for harsh environments, outstanding resistance to alkalis and mild acids, oils and hydrocarbons oils/solvents.  Ideal for use in wet, chemical environments.



  • Overcoating Time @ 20°C : Overnight within 3 days (will vary with temperature, air movements, etc.) after 3 days lightly abrade and solvent-wipe before overcoating
  • Touch Dry @ 20°C: 2 hours
  • Colour: Tinted to any BS4800/Ral/BS381C or bespoke colour

63 Dacfast CR Fast Drying Line Marking Paint

Single pack fast drying chlorinated rubber/alkyd fast-drying paint for line and lane marking on concrete, weathered blacktop, brick, paving and wood. Typical uses include car parks, roads, runways and factory floor demarcation

  • Overcoating Time @ 20°C : 1 hour will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 10 minutes
  • Colour: Yellow, White, Black - other colours to order

64 Dacfast SPE Fast Drying Line Marking

Single pack, fast drying  epoxy ester fast-drying, chemical resistant paint for line and lane marking on weathered blacktop, brick, paving, wood and particularly concrete. Typical uses include car parks, roads, runways and factory floor demarcation

  • Overcoating Time @ 20°C : 1 hour minimum (will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 10 minutes
  • Colour: White, Yellow, Black other colours to order

79WFC Epidac 2W Water Based Epoxy Floor Coating

Two pack water based epoxy floor coating, heavy duty floor coating for concrete floors.  Chemical resistant and highly durable coating.  Low odour suitable for food factories, bakeries and dairies etc.

  • Overcoating Time @ 20°C : Overnight drying but within 3 days (will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 6 hours
  • Colour: White, Pewter (BS00A05), Tile Red. Full range of colours subject to minimum order.

9-7 Dacpol V8 Clear Gloss

Single pack moisture-cured clean polyurethane varnish, typically used as a tough, durable coating for wood and concrete floors. Also for furniture, bar tops, tables, etc. Completely unaffected by water, alcohol, etc. Dacpol V8 is normally used on interior surfaces. Exposure to sunlight produces yellowing of the film and a degree of chalking
  • Overcoating Time @ 20°C : Overnight (flat down lightly if left more than 3 days) (will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 1 hour
  • Colour: Clear Gloss

Molochite Anti Slip Additive

Molochite inert china clay aggregate typically used as a non-skid aggregate for the use with Dacrylate range of floor paints. To use - Immediately prior to application of the final coat of floor paint, thoroughly mix into the paint, 1kg of Molochite or whilst the final coat of the floor paint is still wet, sprinkle the 'Molochite' evenly over the surface.


Rustoleum 2300 Line Marking Paint Aerosol

Ideal for drawing lines in parking areas, plants, warehouses, sports fields, stadiums and all sites where traffic control is required. HARD HAT® Striping Paint should be used in light traffic exposure. The product is designed for use together with the Rust-Oleum® Striping Machine. The products are based on lead- and chromate free pigments.

 

 

  • Coverage: 120 Metres
 
Showing 1 to 10 of 10 (1 Pages)
×

Join Our Newsletter

Signup today for free.

View our Privacy and Cookie policies