“We have your application covered”
Corroless CCI 450 is an anticorrosion coating developed for use where the substrate needs to be clearly visible. Formulated using clear resins and vapour phase corrosion inhibitor (VCI), it works both by contact and vapour phase inhibition. It has a touch-dry glossy finish which can be safely handled. It can be applied to damp surfaces and can give up to 4 years protection. It is easy to remove or recoat. It can be used for switch gear, electrical boxes, navigation equipment and the storage of metal parts, pipes and other steel plant. It is also used for the extra protection of painted steel plant, while in storage or transit. It is available in a handy aerosol can for smaller, ongoing maintenance projects.
Corroless CCI Powder is a finely divided solid which gradually volatilises, producing a vapour which protects steel and other metals from corrosion. It is primarily intended for use in the offshore industry where plant is temporarily taken out of service and requires anticorrosive protection during downtime. Corroless CCI Power can be blown into pipework, void spaces, box sections and similar, where normal anticorrosive protection would be impossible. It can be discharged into the marine environment (subject to normal legislative restrictions) and it has been accepted onto the ‘List for Approved Products suitable for use by the North Sea Oil and Gas Industry’ and is OCNS registered.
Two pack. Rust stabilisng glass flake reinforced epoxy primer Excellent track record on bridge maintenance painting projects where blast cleaning was impossible, yet longer term performance was required over only hand-prepared steelwork. High film build by brush, can be applied to damp steel surfaces to aid practicality under difficult site conditions. Corroless EPF has undergone extensive independent testing and has gained approvals from: UK Network Rail for bridges and other steelwork; British Standard BS6920:2000 for use with potable water (in conjunction with Corroless RF35 (2006); to DEFSTAN and MIL specs for bulk fuel tank interiors (together with Corroless RF35 White); and it also has a designated NATO stock number.
Single pack. Rust stabilising primer for use on weathered rusted areas of galvanizing, steel and other metals. Enables the use of one primer for various substrates. No etch primer or barrier coat required on galvanizing. Excellent adhesion and flexibility.
Single pack high build glass flake reinforced alkyd topcoat. Abrasion resistant and fast drying compared to other high build alkyds.
Two pack high build glass flake solvent-less epoxy coating. Used in conjunction with Corroless EPF to BS6920:2000 for use in contact with potable water.
Two pack high build glass flake reinforced solvent less epoxy coating. Approved in conjunction with Corroless EPF for the interior of bulk fuel tanks including aviation fuel. (MIL-PRF-4556F and DEF STAN 80/97). Applications to fuel tanks, non potable water tanks, pipe linings, cargo holds, sewage works etc.
Two pack glass flake reinforced aliphatic polyurethane gloss finish. Excellent gloss retention. Tough durable finish, good anti abrasion resistance and weathering characteristics. Excellent chemical resistance. Indefinitely recoatable. Suitable for urban, marine and industrial environments.
Two pack glass flake reinforced aliphatic polyurethane semi-gloss finish. Excellent gloss retention. Tough durable finish, good anti abrasion resistance and weathering characteristics. Excellent chemical resistance. Indefinitely recoatable. Suitable for urban, marine and industrial environments. Approved for use by Network Rail (approved systems available upon request).
Single pack rust stabilising primer. Can be applied to steelwork where blasting is not possible, manually prepare to ST2 standard of EN ISO 8501-1:2007. Over 30 years track record in corrosion control. Will withstand operating temperatures of up to 200 Deg C.