Corroless RF16

 Single pack high build glass flake reinforced alkyd topcoat.  Abrasion resistant and fast drying compared to other high build alkyds.

• Colour: Tinted to BS4800, Ral and BS381C

Corroless SHB

Single pack.  High build rust stabilising primer for hand prepared steel.  High film build achieved by brush application.  Nato Stock Number 0474-8030-99-535-3044.

• Colour: Buff

Item 115 Epidac 2 HB Alum Epoxy Primer 90-268

Two pack high build epoxy primer compliant to Environmental Protection Act (1990) Clause 20(d) Guidance Notes PG6/23 (97). Typically used as a maintenance primer to give improved adhesion and flexibility when applied to manually clean steelwork and existing aged coatings. Excellent adhesion to clean bright galvanised steel. Tolerant of surface moisture

• Overcoating Time @ 20°C : Refer to technical data sheet
• Touch Dry @ 20°C: Refer to technical data sheet
• Colour: Metallic Aluminium

Item 116 Epidac 2 HB Epoxy Undercoat Item 90-269

Two pack high build epoxy undercoat compliant to Environmental Protection Act (1990) Clause 20(d) Guidance Notes PG6/23 (97). Typically used as a high-build epoxy undercoat for up-grading existing chlorinated rubber, vinyl, acrylated rubber, oleoresinous, alkyds, silicone alkyds and similar applications. Epidac 2 HB Epoxy Undercoat is tolerant of surface moisture

• Overcoating Time @ 20°C : Refer to technical data sheet
• Touch Dry @ 20°C: Refer to technical data sheet
• Colour: Light Grey

Item 155 Mordant Solution Type T 150-23

Pre-treatment for galvanised steel to improve adhesion of subsequent coating system.

A blend of copper carbonate, phosphoric acid, water and alcohols complying with the BR Specification for 'T' Wash

• Overcoating Time @ 20°C : As soon as surface is completely dry
• Touch Dry @ 20°C: 20-60 minutes

Item 168 High Solids Polyurethane 585

Acrylic modified polyurethane coating typically used for the long term protection of galvanising, steel and similar

Fully compliant to Environmental Protection Act (1990) as required by Guidance Note PG 6/23 (97), Clause 20(d)

• Overcoating Time @ 20°C : N/A
• Touch Dry @ 20°C: 2 hours (will vary with temperature, air movements, etc.)
• Colour: Any BS4800/Ral/BS381C or bespoke colour