Rustoleum 1015/1078 Heat-Resistant Coating

 HARD HAT® Heat Resistant Coating can be applied on new, bright or shot-blasted steel or well pre-treated coated surfaces such as barbecues, boiler fittings, hot air cannons, exhausts, etc. Intended for small maintenance jobs and repairs. Provides protection up to a dry heat of 750°C (short-term peak load) for applications indoors or in a sheltered outdoor environment.

• Application: Brush, Roller
• Drying Time: Recoat: 24 hours

Rustoleum 2102 Adhesion Primer Aerosol

 Rust-Oleum 2102 Adhesion Primer should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum Hard Hat 2100 Topcoats. Intended for small maintenance jobs. Should be used in light industrial exposures, normal humidity and interior applications.

• Coverage: 5.5 Sqm
• Formulation: Solvent Based

Rustoleum 2300 Line Marking Paint Aerosol

Ideal for drawing lines in parking areas, plants, warehouses, sports fields, stadiums and all sites where traffic control is required. HARD HAT^® Striping Paint should be used in light traffic exposure. The product is designed for use together with the Rust-Oleum® Striping Machine. The products are based on lead- and chromate free pigments.

• Coverage: 120 Metres

Rustoleum 2300 Marking Paint Aerosols

 The products are based on lead- and chromate free pigments. Marking Paint 2300 should be used on metal, concrete, asphalt, gravel, soil and grass, etc. The product is not water-soluble and should be used in light industrial exposures, normal humidity and interior applications.

• Coverage: 2 Sqm
• Colour: Available in: Yellow, White, Fluo Red-Orange

Rustoleum 2500 Transparent Topcoat

 Rust-Oleum Transparent Topcoat 2500 should be applied over Rust-Oleum Hard Hat Fluorescent Topcoats 2200 or Metallic Topcoats 2100 or can be used to restore the gloss of faded old coatings. Can be applied direct on several metals like: aluminium, brass, bronze, chrome and copper. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications.

• Coverage: 3.5 Sqm
• Colour: Transparent

Rustoleum 2990 Stain Blocking Aerosol

Hard Hat Stainblocker is a renovation paint which can be applied directly on ceilings, plaster, cement, wood, concrete, wallpaper, isolation walls, old paints, etc. Can be used as topcoat or can be recoated with standard wall paints.
Hard Hat Stainblocker is a matt white high-pigmented coating based on a plasticized acrylic resin for the permanent isolation of problem stains from nicotine, soot, tar and rust and the effects of moisture, graffiti and a numerous other colourings.

• Coverage: 2.1 Sqm
• Colour: Matt White

Rustoleum GALVA PLUS Aerosol

Hard Hat Galva-Plus Silver 2120 is a fast drying zinc/aluminium coating. The product contains pure zinc and aluminium as pigment. Galva-Plus Silver 2120 is intended to be applied on small areas or for touchup. The product should be used as a single coat in light industrial exposures and corrosive environments.

• Coverage: 1.7 Sqm
• Colour: Aluminium Gloss

Rustoleum GALVA ZINC-ALU Aerosol

 A fast drying zinc rich primer/topcoat based on an epoxy ester resin. The product contains pure zinc and aluminium as pigment and provides cathodic protection. Should be used as a single coat in light industrial exposures, corrosive environments and high humidity areas. For use on damaged galvanized steel surfaces and is intended to be applied on small areas or for touch-up.

• Coverage: 1.2 Sqm
• Colour: Sparkling Aluminium

Rustoleum GALVA-ZINC Aerosol

A fast drying zinc rich primer based on an epoxy ester resin. Zinc Spray 2185 is intended to be applied on small areas or for touch-up.

Should be used on new, bare steel or galvanised steel surfaces. The product contains pure zinc as pigment and provides cathodic protection. The product can be recoated with non-saponifiable coatings. Zinc Spray 2185 should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.

• Coverage: 1.4 Sqm
• Colour: Matt Grey

Rustoleum Hard Hat Anti-Rust Primers

Anti-rust primers should be used on new, bare or slightly rusted steel surfaces. They should be used in light industrial exposures, normal humidity and interior applications and should be recoated with Rust-Oleum^® Hard Hat topcoats. The products contain rust-inhibitive pigments and are leas- and chromate free.

• Coverage: 5.5 Sqm
• Colour: Available in: Red Brown (2169) & Grey (2182)

Rustoleum Hard Hat Flourescent Topcoat Aerosol

 1. GO FURTHER!

• Coverage: 2.1 Sqm
• Colour: Available in: red, orange, yellow, green and blue

Rustoleum Hard Hat Metallic Topcoats

1. GO FURTHER!

• Coverage: 2.5 Sqm
• Colour: Available in: Sparkling Aluminium, Silver Aluminium, Stainless Steel

Rustoleum Hard Hat Topcoat RAL Colours

 1. GO FURTHER!

• Coverage: 2.5 Sqm
• Colour: standard RAL colours

Rustoleum Stainless Steel Coating Aerosol

1. GO FURTHER!

• Coverage: 2.5 Sqm
• Colour: Stainless Steel

Rustoleum Super Grip Anti Slip Aerosol

 SuperGrip^® Anti-Slip sprays are based on a fast drying acrylic modified short oil alkyd. The coloured products are based on lead- and chromate free pigments and contain a special anti-slip additive. Should be applied on metal, concrete, ceramic and wood surfaces or properly prepared painted substrates. Steel should be primed with 2169 or 2182. These products are intended for small maintenance jobs or for touch-up.

• Colour: 2.5 Sqm