factory menu paint roller search lock profile switch star remove
Corona Virus Update
Our store is still open.
Call us on 0161 624 4941 or email us at sales@kenyonpaints.co.uk

Industrial Paints & Protective Coatings

“We have your application covered”

Dacrylate Paints Highways Agency

Item 111 Epidac 2 HS Red Oxide 90-199

Two pack  high solids epoxy with zinc phosphate rust inhibitor for the long-term protection of steel, with low temperature curing properties.

Compliant to Environmental Protection Act (1990) Clause 20(d), Guidance Note PG6/23 (97).

  • Overcoating Time @ 20°C : Refer to technical data sheet
  • Touch Dry @ 20°C: Refer to technical data sheet
  • Colour: Red Oxide

Item 112 Epidac 2 HS MIO Undercoat/Finish Item 90-200

A high solids epoxy with 80% MIO pigmentation for the long-term protection of steel and galvanised fabrications, with low temperature curing properties.

Compliant to Environmental Protection Act (1990) Clause 20(d), Guidance Note PG6/23 (97).

  • Overcoating Time @ 20°C : Refer to technical data sheet
  • Touch Dry @ 20°C: Refer to technical data sheet
  • Colour: Grey (approximately British Standard 4800 00-A-09)

Item 115 Epidac 2 HB Alum Epoxy Primer 90-268

Two pack high build epoxy primer compliant to Environmental Protection Act (1990) Clause 20(d) Guidance Notes PG6/23 (97). Typically used as a maintenance primer to give improved adhesion and flexibility when applied to manually clean steelwork and existing aged coatings. Excellent adhesion to clean bright galvanised steel. Tolerant of surface moisture

  • Overcoating Time @ 20°C : Refer to technical data sheet
  • Touch Dry @ 20°C: Refer to technical data sheet
  • Colour: Metallic Aluminium

Item 116 Epidac 2 HB Epoxy Undercoat Item 90-269

Two pack high build epoxy undercoat compliant to Environmental Protection Act (1990) Clause 20(d) Guidance Notes PG6/23 (97). Typically used as a high-build epoxy undercoat for up-grading existing chlorinated rubber, vinyl, acrylated rubber, oleoresinous, alkyds, silicone alkyds and similar applications. Epidac 2 HB Epoxy Undercoat is tolerant of surface moisture

  • Overcoating Time @ 20°C : Refer to technical data sheet
  • Touch Dry @ 20°C: Refer to technical data sheet
  • Colour: Light Grey

Item 121 Epidac 2 EC/MIO Undercoat Finish 90-270

Two pack high solids epoxy with 80% MIO pigmentation for the long-term protection of galvanised fabrications

Compliant to Environmental Protection Act (1990) Clause 20(d), Guidance Note PG6/23 (97) for use as a primer or finish coat.

  • Overcoating Time @ 20°C : 8 hours with epoxy or polyurethane finishes (will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 3 hours
  • Colour: Grey (approximately British Standard 4800 00-A-09)

Item 141 Thixotropic Bitumen Highways Agency 90-14


  • Overcoating Time @ 20°C : After 16 hours with self (will vary with temperature, air movements, etc.)
  • Touch Dry @ 20°C: 4 hours
  • Colour: Black, Brown

Item 155 Mordant Solution Type T 150-23

Pre-treatment for galvanised steel to improve adhesion of subsequent coating system.

A blend of copper carbonate, phosphoric acid, water and alcohols complying with the BR Specification for 'T' Wash

  • Overcoating Time @ 20°C : As soon as surface is completely dry
  • Touch Dry @ 20°C: 20-60 minutes

Item 168 High Solids Polyurethane 585

Acrylic modified polyurethane coating typically used for the long term protection of galvanising, steel and similar

Fully compliant to Environmental Protection Act (1990) as required by Guidance Note PG 6/23 (97), Clause 20(d)


  • Overcoating Time @ 20°C : N/A
  • Touch Dry @ 20°C: 2 hours (will vary with temperature, air movements, etc.)
  • Colour: Any BS4800/Ral/BS381C or bespoke colour
 
Showing 1 to 8 of 8 (1 Pages)
×

Join Our Newsletter

Signup today for free.

View our Privacy and Cookie policies